Function |
Carries one 40 ft ISO Container.
Meets all DOT, TOFC, AAR, FMVSS, ANSI, SAE and
TTMA specifications in effect at the time of
chassis manufacture and applicable to operation
in the United States. |
Overall Chassis Length |
40ft. 6in. |
Overall Chassis Width |
96 inches |
Tridem Location |
78 1/2 inches to center axle |
Kingpin Location |
30½ inches from rear face
of front bolster. |
Maximum Rear Height |
48 in. |
Main Frame Width |
40 in. |
Main Beams |
Wide flange I-Beam 12 inch deep,
19 lb/ft, hot rolled steel, ASTM A572-50 |
Gooseneck Beams |
5 inches deep I-Beam, fabricated
with ½ inch x 4-inch flanges and ¼ inch
x 4 inch web |
Cross Member |
All cross members are formed
from 7-gauge steel. |
Upper Coupler Assembly |
Pick up plate is 5/16” thick
and extends approximately 18” behind
the kingpin and is reinforced fore and aft by ¼ inch
formed channels |
Bracing |
Additional X bracing at rear |
Front Bolster |
¼ inch thick channel 9
inches high x 6 inches deep with 10 gauge stiffeners |
Rear Bolster |
Box type with 3/8 inch x 8 inch
top plate and ¼ inch thick, formed channel
lower member with ICC light holes. A small license
plate bracket will be mounted on the under side. |
Twist Lock & Slide Pins |
Meets ISO standards and requirements. |
ICC Bumper |
4 inch x 4inch x 3/16 inch Tube
step bumper. Main beam
and bumper struts are extended 2 inches to protect
rear
bolster. (No rubber dock bumpers) |
Landing Gear |
Jost two speed AAR approved,
square leg. 50,000 lb. lift
capacity and 140,000 static load capacity. |
Landing Gear Axle Type |
Standard |
Landing Gear Foot Group |
10 in. by 10 in. Low profile
sandshoe |
Crank Handle Location |
Curb side handle |
Suspension |
Hutch |
Axle Quantity |
Three Axles |
Suspension Type |
Spring-Ride |
Axle Centers |
49 inch |
Springs |
Three Leaf |
Hub Type |
5 spoke |
Hub Material |
Steel |
Hub Manufacturer |
KIC |
Drum |
Inboard mounted (5 spoke) |
Rim/Wheels |
7 1/2 X 20 tube type |
Wheel/Rim Color |
White |
Rim Spacer |
4" corrugated |
Tires |
Cheetah Supplied |
Tire Size |
10:00 X 20 |
Tire Inflation System |
None |
Axle Vendor |
Meritor |
Axle Type |
TN |
Wall Thickness |
1/2 inch |
Axle Track |
71.5 |
Brake Lining Options |
Standard |
Lubrication |
Grease (EP) |
Slack Adjusters |
Bendix 5 1/2 inch |
Brake System Vendor |
WABCO |
Brake System Type |
2S1M |
Brake Chambers |
Haldex |
Hubodometer |
None |
Electrical System |
12 volt, 7-way split pin receptacle
plug; modular wiring
harness |
Light Vendor |
TruckLite |
Light Attachment |
Grommet mounted |
Light Type |
Incandescent |
Metal Preparation |
Clean, dry steel and NACE No.
3 /SSPC-SP-6
“Commercial Blast Cleaning” |
Primer |
70% Zinc Rich Primer |
Topcoat |
Urethane Topcoat |
Color |
Black |
Markings |
FHWA plate, tare weight, 2 small
Cheetah logos. |
Customer Decals |
Furnished by Customer |
Conspicuity |
Meets DOT requirements |
Registration Holder |
Plastic with clear screw on top |
Mud Flaps |
Cheetah Supplied |
Mud Flap Mounting |
3 mounting bolts |
Steel & Fastners |
All structural steel is ASTM-A572,
Grade 50, or ASTMA607, Grade 50. All structural
fasteners are Grade 5 or better and are zinc
coated |
GVWR |
75,000 lbs |
Weight |
Approximately 8,300 lbs. + 2% |
